WELLAND Wood Vents Maple Flush Mount Floor Register Unfinished
It is designed to lay flat with the surface of the wood flooring, provides two-way diffusion and is the preferred style for sand and finish hardwood floors where an architecturally smooth look is desired. Each frame is grooved on the outside to accommodate most 3/4” tongue and groove flooring. It is recommended that this floor register be installed during the installation of your hardwood floor, while the use in the traffic area is not recommended.
WELLAND Wood Vents has been serving the American flooring business for more than 10 years. We offer all most species of floor register in various sizes. Our product lines include flush-mounting vent, self-rimming vent, baseboard diffuser vent, wall vent, and cold air return vent. We always provide high-quality service
|Finishing:||Unfinished, You can paint according to the floor color.|
|Wood Type:||Maple Wood (Click here to know more about the species)|
|Weight||Up to 3lb(Depend on the product size)|
|Application:||Wall registers, wood registers, air registers, heat registers, register covers|
**Colour may vary slightly based on the underlying wood product**
Fit duct sizes opening Available :
|2¼" x 10"( 4.5" x 12" x 0.75" overall )||4" x 10"( 6.75" x 11.375" x 0.75" overall )||6" x 14"( 9" x 16.75" x 0.75" overall )|
|2¼" x 12"( 4.5" x 14.125" x 0.75" overall )||4" x 12"( 6.75" x 13.5" x 0.75" overall )|
|2¼" x 14"( 4.5" x 16.375" x 0.75" overall )||6" x 12"( 9" x 14.75" x 0.75" overall )|
How To Measure:
- Measure the size of the duct opening. Do not measure your current floor register.
- Note: you must measure the size of the duct opening
Easy to Install:
Flush models nestle into a wood frame manufactured to fit the duct opening and installed along with new flooring or are retrofit into an existing floor. The frame is nailed into place, while the register unit itself can be lifted out for cleaning.
-The floor vent cover face is flush with the floor surface and can be equipped with an optional damper whose airflow control thumbwheel is recessed to make sweeping and vacuuming easy.
We have other product types with same species:
|Drop-In Vent||Cold Air Return Vent||Baseboard Diffuser Vent|
|Material:||Maple Wood||Maple Wood||White Oak|
Frequently Asked Question(FAQ) & Answer:
Question: it says it's "flush-mounted". So why would it stick out?
Answer: Our flush mounts go into the floor and become flush with it when installed properly. The self-rimming vents stick up from the floor.
Question: What is the thickness of the product?
Answer: 3/4 Inch(0.75")
Question: Do these have dampers?
Answer: No, but you can buy from our website
Question: Do they come prestained or do you stain then yourself?
Answer: Flush mounts are unfinished, but you can paint according to the color of the floor.